If you have a surveillance system with multiple cameras; then you are most likely using a CCTV power box with multiple inputs to power all of your CCTV cameras. Sometimes if your surveillance system goes offline and it seems your power supply is bad; that may not actually be the case. Let’s go over some steps we can take to make sure that’s the problem.

First step or last step

The first or last step may be to take another CCTV power supply and replace the one in question to see if it starts receiving power with this new one.

Now, this is an easy first step for a surveillance installer or dealer to take, as they most likely have quick access to another power source. For an average installer or customer; this can be a bit more complicated to do and would really be a last resort type of scenario.

Whichever step you end up doing this in, you will have 2 different results. The new power box will work and power your surveillance system; or will have the same faults as the other.

If it works, you have most likely discovered that your problem lies with the power box. On the other hand if this new box also fails; then most likely you have eliminated the power box as a source of failure.

Next step: short camera?

If you have a security camera that has an electrical short in its connection to its power supply; then this would force your power supply to shut down. Testing this can take a bit of time, but you’ll need to individually connect each camera to its power supply and test if one of them is preventing the system from turning on.

If you find a camera that is shorting out the system; then you will need to determine if it is the CCTV cable or the security camera. To do this, you’ll need to get another power and video cable or grab one from a working source and try the camera again. If this works; then your problem lies with the cable and it needs to be replaced. If the new cable doesn’t work; then you will need to check your camera’s power connections and possibly replace the camera.

Isn’t that a camera short? Test the main power cord and connection

Honestly, this should be the first step before anything else; because if he is at fault it saves you a lot of time. Each CCTV power box will have a plug that plugs into an outlet, and to test this you can either try replacing the cable or you can plug it into multiple outlets to see if the outlet has the fault.

check the fuse

If you only experience power outages on certain security cameras; then you may have a blown fuse (assuming you use a fused power supply). Most CCTV power boxes come with spare fuses, and replacing the fuse may do the trick.

By trying these various troubleshooting methods; you can more accurately determine where your CCTV power problem lies.

If you are one of the few who wish to travel as much as possible before leaving this world, then this is for you. Here are the top 5 places you must visit before you die. This is useful for everyone who is going to travel in the near future and also for those planning a trip soon. Here are some ideas about the place you are going to visit and the specialty of the place. These places are spread across many countries in the world, which means that you have to travel through many countries to visit these places. Therefore, it is useful if you have an idea of ​​the customs, traditions and what not to do in the country and sometimes it is essential to have an idea about the place of the visit, as this makes your trip much easier and more convenient.

Before we get to know the place, let’s look at some basics to follow while traveling. Pack as little luggage as possible and be prepared for the unexpected. Plan your trip with enough rest time as traveling too much would bring you a lot of trouble later on. Plan your trip well in advance and organize everything accordingly. Now that you’re ready for the ride, let’s look at the top 5 places to visit before you die based on the latest survey.

Kauai, Hawaii: If you want to visit heaven on earth, then you must visit this place. This place is nicknamed ‘Garden Island’, famous for its vegetation and panoramic view. Although there are 8 other islands in Hawaii, Kauai is a hot cake island as it is the oldest of the 8 and has many cliffs at its heart, peaks and the picturesque Wailua River. All these geological spectacles have made Hawaii a paradise on earth.

Wengen, Switzerland: If you are tired of busy city life, you must visit Wengen, Switzerland. A city where cars have not been used in the past 100 years and is surrounded by alpine mountains, grassy hills is a spectacular tourist spot. The city is known for its best ski slopes in the world and it is the only place that is clean and unpolluted in the entire world.

Santorini, Greece: A unique and beautiful place along a cliff of volcanic rocks. It is the only place that is surrounded by the largest volcanic eruptions in the world. The whitewashed houses with a layer of volcanic ash make them different and give them a pearl color that makes the place more attractive.

Mount Fuji, Japan – The highest peak in Japan and is one of the holy places that is also the most popular place for artists and tourists. Amazing architecture, rich cultural experience, blooming lakes all together will surely make your visit very exciting. Mount Fuji is one of the best nature destinations in the world.

Cinque Terre, Italy – a city located in northern Italy and a picturesque town with cliffs and mountains. A place known for the best dessert wine while enjoying the stay on the shores of the Mediterranean Sea makes your trip so much fun.

Did you know that if you train your pug incorrectly, your healthy and obedient pug could become a disaster for you and your family? It doesn’t take months for a pug puppy to acquire bad, stinky clothes that will haunt him for years.

Every dog ​​needs training. The same goes for a pug dog. The best time to train your pug is the first day you have it. Pugs are usually brought into homes when they are 8 weeks or older. Wouldn’t you like your pug to follow your every command from day one?

So establishing your authority and commanding attention are essential. These two rules are the fundamental basis of training your pug. For some of you, success comes easy, but for others, even if you’ve laid a solid foundation, you may not be guaranteed an obedient pug. If you’re frustrated by your pug’s bad stinky habits, these 7 surefire tips will help you transform your pug’s behaviors in less than 30 days, if you apply them consistently throughout your pug’s training program:

1) Start training your pug puppy early. Old dogs can learn new tricks, however, the sooner your pug is introduced to proper house training, the quicker your pug will learn.

2) Communicate with your pug puppy. Talk to pug like you would talk to your kids, when they were little kids. Pugs can sense and receive both your verbal and non-verbal communication. Sound weird? Well, not really, it’s quite simple. For example, just say that your pug is misbehaving. You could just say “no” in a deep, angry voice. As uncomfortable as it may seem, your pug will feel it. So, you have to show him what the right actions are. This will help her distinguish between correct and incorrect actions.

3) Reward your pug for listening to your commands. Give them the credit by padding on the forehead or around the neck. Give your pug a variety of rewards. It could be his favorite food, toy, or treat.

4) Increase the frequency of rewards for your pug. Research has shown that the more often a puppy is rewarded, the faster and more efficient the learning process becomes. Look for instances to reward your pug with praise or treats. For example, if your pug is lying down quietly and minding his own business, praise him. Look for opportunities to praise, not punish.

5) Feed your pug regularly, especially when he is in the puppy stage. Keep your pug puppy hydrated throughout the day. When time permits, take your pug for a walk and tell him “Go potty” right before he relieves himself. Pat him for encouragement.

6) Never punish your pug! Teach your pug using positive and motivating methods. Proactively training your pug will produce better results than reactive training. This means that when your pug is doing well and behaving correctly, you proactively reward them. On the other hand, don’t sympathize with your pug’s bad behavior.

7) Play with the pug! Pug loves to play. It is vital that whenever any obedience training is practiced and at the end, the owner enjoys some playtime with their pug. You can run or play tug of war with your pug during playtime.

These 7 amazing secrets will put you on the right path to compliant training. Don’t waste any more money to sign your pug up for an obedient training lesson when you can easily save him. It will also give you the opportunity to create a lasting and loving bond with your pug. Therefore, it is worthwhile to train your pug at home.

Good luck!

Music Video Production

There are many different types of music video production companies in Miami. The key is to find the right one for your band. This article will give you an overview of some of the most common companies and what you should look for when hiring a production company. Studio B, Caldera Films, Regulus Films, and Tribe Sound Productions are all excellent choices. Below, we’ll discuss some of the best options for your music video.

Caldera Films is a full-service video production miami squad. They tackle a wide variety of projects, with a celebratory edge to each. These films communicate the brand story in a way that leaves the viewer wanting to know more. The company’s production team consists of a team of talented film editors and directors. This diverse team specializes in everything from video openers to logo reveals.

Whether you are creating an artist’s music video or want to make a commercial, Studio B is an excellent choice for your production needs. Their base rental price includes the use of the Studio, three LED continuous video lights, two light stands, a V-Flat backdrop support pole, six additional paper backdrops, extension cords and a bluetooth boombox. They will also supply the necessary equipment for sound recording, editing and color correction.

Music Video Production Companies in Miami

If you’re looking for a company that will create stunning music videos for you and your band, Regulus Films is a great choice. The team includes highly trained film-makers, makeup artists, and cinematographers. They’ll help you with pre-production, editing, marketing, and distribution, and have decades of experience in the field. Their team can handle all aspects of a music video production, including marketing and distribution.

If you’re looking for a music video production company in Miami that will bring your vision to life, look no further than Tribe Sound Productions. With an award-winning team and smart visual solutions, the company offers everything you need to make your music video a success. Other video production companies in Miami include Maximum Flavor Media, which was founded in San Francisco in 2011 and is dedicated to telling great stories through videos. Partizan, which has twice been named “World’s Best Production Company,” creates interactive events and digital content.

As a premiere video production company, Think Global Media Inc. serves clients in central Florida, including Orlando, Kissimmee, Winter Park, and Hillsborough County. Other locations include Tampa, Clearwater, and St. Petersburg, as well as the Miami, Fort Lauderdale, and Palm Beach areas. For more information about our company, please visit our website or call us at (954) 225-4545. We look forward to serving you!

Here are tips that inventors must do or understand when it comes to inventing if they want to be successful.

1. Understand that inventing is a business. Treat it like one.

2. Do some research on your idea before submitting it to a company. Don’t tell them “There’s nothing like this!” By spending 2 minutes on the web they find several articles exactly like yours.

3. Understand that each company has a different method and time frame for reviewing submissions. Don’t send a proposal in the mail on Monday and call them on Tuesday at 8:30 am to find out when they will send you a contract. It’s a simple task to ask the company you’re submitting material for review “What is your typical turnaround time for reviewing submissions?”

4. Don’t marry your product and be totally against changes to make it marketable.

5. Put your contact information on every article you send them. Don’t make them guess who smells it.

6. Don’t send unsolicited prototypes. Let them know that a prototype is available upon request. A company cannot be expected to pay shipping for every unsolicited prototype it receives.

7. Understand that every idea is not a million dollar idea. Yes, there are million dollar ideas, but they are not the majority of ideas. Be realistic in your expectations

8. Realize that everyone who rejects your idea is not stupid.

9. Do not submit a 20 page explanation of your product. Be concise and clear in your sell sheet. If it takes more than two pages to explain your idea, you have a problem.

10. Know who you are sending your presentation to in the company. Don’t assume they’ll figure it out for you if you just send it to the company.

11. Not having an idea/plan of who to contact to license your product before spending the money on a provisional patent. A large number of inventors pay for a provisional patent, knowing that they do not have the money for a full patent and have not investigated who might be interested in licensing it. They spend 6 months of the year looking for company contacts, which means they only have 6 months to try to get some interest before their time is up. They had no intention of paying for a patent and now they are forced to either drop it or pay for a patent. If you do it right, you have all your 12 months to find a company.

12. Be patient and don’t call every other day asking if your product has been reviewed. They may be on vacation, sick or very busy. They are not sitting and just waiting for their package.

13. Don’t assume that the person reading your sales sheet will magically know all the selling points/benefits of your product that you missed. Example: What if your idea revolves around fishing and they don’t fish and don’t know anything about it?

14. Keep a concise record of who you contacted at the company and what you sent them. Several Inventrs send packages and two days later they couldn’t tell you what they sent or to whom. The person from that company calls and he struggles to remember who this person is while he talks to them on the phone.

15. When you contact a business, remember that they own the business, not you. Write your letter to the company from a realistic perspective, give them real facts, not what you want them to be. Do not write your letter in a threatening tone or from the point of view that they are crazy if they reject you. Don’t fill your letter with information they don’t really need, like how you came up with the idea, how long it took you to build your prototype, etc. They only care if it will make them money. DO NOT USE THE PHRASE “My idea is worth MILLIONS!!!” Let them decide for themselves what it is worth.

16. Don’t send prototypes to companies that don’t work and tell them “I’m sure you can work out the bugs.”

Nimbus is a recently released glide-based puzzle racing game that may be in the running for the next indie game of the year. He was seen last year as a participant in the Noumenon Games Independent Games Festival. Not only does the core mechanics of the game offer an extremely enjoyable and challenging experience, but the map shortcuts and unlockable features ensure that this will be a title that will keep players coming back again and again.

The game has the player controlling a miniature, semi-flying, mostly gliding machine. The character is determined to rescue his girlfriend from a giant, scary-looking robot. Navigating through each level provides Nimbus’s main challenge. Players can’t just fly towards the target, as there is no real way to propel the vehicle forward other than to slide. The overall feel of the game reminds me of Learn to Fly, only instead of trying to do the best distance, the goal is to get to the finish line. Levels require the player to change colored switches, dodge falling spiked balls of death, and maintain momentum long enough to reach the checkered goal.

Due to the quality level design in Nimbus, some of the later levels may require a lot of piloting skill. It’s unfortunate that the three difficulty levels only influence how many lives are provided at checkpoints. Near the end of the game, the harder difficulties can become frustrating for some players, while others may find the challenge engaging. Completing a difficult level after numerous attempts is extremely satisfying and is part of what makes Nimbus so addictive.

Nimbus constantly pressures the player to complete each level as quickly as possible. After completing each level, a screen displays the player’s global rank, as well as their friends’ rank. I played several of the levels over and over to get a higher rank. There are also collectible coins hidden throughout many of the levels. Coins reward players with new ships and contrail colors, and are conveniently well hidden. Don’t expect to collect most of the coins on the first play either, as some of them are devilishly hard to find. Alternate exits exist that unlock different shortcuts on the overworld map and is another reason to go back and play previous levels. World progression is similar to Super Mario 3, so players familiar with that game will have a good idea of ​​the setting.

The soundtrack is impressive. Expect to hear great music. Each themed stage has its own mood and music selection. The great soundtrack combined with outstanding graphics reminiscent of the mosaic seen in Little Big Planet help give the world of Nimbus its own feel; The overworld is sculpted from large blocks constructed of felt, populated by curious cube towns. The story never quite takes center stage, which once again reminds me of the classic NES Super Mario series, always focusing more on gameplay than story.

Overall, Nimbus is a solid $10 buy for those interested in an innovative glider-focused puzzle/platformer. There are quite a few levels here, and Nimbus will give players a challenge from start to finish. With serious replayability involving hidden coins, various unlockables, and alternate routes, Nimbus may just be the best game you’ve ever played.

Buy Nimbus on Steam: http://store.steampowered.com/app/50000/

Interview with Tim Smith
author of The Vendetta Factor
Post America (2006)
ISBN 9781424141258
Reviewed by Richard R. Blake for Reader Views (5/07)

Today, Tyler R. Tichelaar of Reader Views is pleased to welcome Tim Smith, author of “The Vendetta Factor.” Tim Smith is an administrator in the human services field who works with adults with disabilities. He resides in Dayton, Ohio, where he also works as a freelance photographer when he’s not busy writing and promoting his books.

Tyler: Welcome, Tim. To begin with, would you describe the basic premise of his novel, “The Vendetta Factor”?

Tim: “The Vendetta Factor” is a throwback to the types of pulp fiction novels written by Raymond Chandler and Mickey Spillane. It’s about Nick Seven, a former CIA agent living in Key Largo, Florida who gets caught up in a nasty turf war between two mob families. An organization controls the action in Miami, but a rival Don in Saratoga Springs, New York wants to take over. Nick is pressured by both families, as well as a federal prosecutor with a personal agenda, as he discovers that he has been betrayed by someone he thought was a friend.

Tyler: The setting and your reference to Raymond Chandler reminds me of old film noirs, especially the movie “Key Largo,” which is also a crime story. Why did you choose the Miami area for your stage?

Tim: I have been vacationing in the Keys and South Florida for several years. As I sat down to write my first Nick Seven adventure, I asked myself a question: If I were a former CIA spy who wanted to go somewhere to start over, where would it be? The Keys was the obvious choice for me.

In that part of the country you have everything that lends itself to a good adventure story: exotic locations, atmosphere and sunsets to die for, nearly every nationality represented, and tremendous name recognition. When you mention “Key Largo,” most people instantly picture Bogart and Bacall. Thanks to the plethora of movies and TV shows set in Miami and South Beach, many readers are already familiar with the area. Plus, it’s better than setting a crime thriller in Dayton, Ohio, and it gives me a great excuse to go there every year to research and go parasailing.

Tyler: What do you think makes your book different from all the other crime novels and mob stories?

Tim: This isn’t your typical cops and robbers crime thriller, where you have the police or a private detective solving the case. My hero, Nick Seven, is Joe Citizen, just a guy minding his own business with no desire to return to the action or intrigue that was part of his previous life. Once he gets pulled into the mix, he has to rely on his wits and instincts to get out and get his life back. There’s also plenty of humor and satire, including an ongoing argument between two hit men over whether Frank Sinatra or Julius LaRosa had the biggest impact on pop culture.

Tyler: Of course, Frank Sinatra was a great singer and he had an Italian background and I think there were rumors about mob connections, but forgive my ignorance, who was Julius LaRosa?

Tim: To quote one of the characters, “Have you never heard of Julius LaRosa, one of the greatest singers of all time? That’s amazing! That guy could hit a high C like I hit goals. Have you ever got a high C right?”

Seriously, LaRosa was an up-and-coming young singer on Arthur Godfrey’s daily TV show in the 1950s. (You’ve heard of Arthur Godfrey, right? Good.) One day, Godfrey fired LaRosa on air, live, for an imaginary slight, and her career never fully recovered. Although I’m a big fan of Sinatra, I thought I might add a few laughs by having the plot as a gag throughout the book, without disrespecting either gentleman.

Tyler: Well, my bet is still Frank Sinatra, but thanks for the explanation. Tim, what really makes a good crime novel is often the hero or the detective. Can you tell us a bit about your main character, Nick Seven?

Tim: Nick is a former CIA spy who spent his career tracking down terrorists around the world. While on assignment years before, his wife was killed in a bombing that was meant for him. After getting revenge on the man responsible, he left the service and settled in the Florida Keys, running a club on the Gulf of Mexico with Felicia, a former co-worker from Barbados for whom he always had a thing.

Nick is cynical, cold and tough with a sensitive romantic side that he likes to keep hidden. When he was a spy, he always acted like a maverick and still insists on leading his life his way. He’s the kind of guy your mom wouldn’t let you play with, but you’d want to be on your side.

Tyler: Would you say you’re a lot like Nick Seven, or is he effectively a fantasy character?

Tim: A lot of my own personality traits came into Nick Seven, and I consider him my alter ego. You can do the things I can only dream of: live in The Keys with a beautiful Barbadian woman, get involved in intrigue, beat bad guys and win at Blackjack and Poker.

Tyler: Nick sounds like a character a lot of guys want to be. Richard Blake, who reviewed “The Vendetta Factor” for Reader Views, said the novel has great cinematic potential. How do you envision a movie of the book and who would you like to see play Nick Seven or even some of the other characters?

Tim: I could see this as a cross between “CSI: Miami” and “Peter Gunn”, using the exotic locations I described in the book accompanied by a retro jazz score. I’ve always imagined George Clooney or Pierce Brosnan playing Nick. They both have the “cool factor” and sarcastic wit needed to embody the character I created. As for Felicia, I’d go with Khandi Alexander or Vanessa Williams.

Tyler: I understand that “The Vendetta Factor” is your third novel. What were your previous novels about?

Tim: “Memories Die Last” introduced Nick Seven, bringing him out of his self-imposed exile when the CIA convinces him that the terrorist who killed his wife may still be alive, forcing Nick to relive the events he had banished to the basement long ago. . Investigating him reveals high-level government corruption and cover-ups.

The follow-up, “Never Trust Your Dreams,” has Nick and Felicia reluctantly involved in America’s war on terror as they try to outwit a rogue agent from their past. Part of the conspiracy has Nick as the fall guy for a murder he didn’t commit, one he must solve to get clean.

Tyler: I understand you’ve won a few awards for your novels. I’ve always been curious about prize contests because there are so many out there. Could you tell us what awards his novels have won, how he entered the contests, and how a writer should decide which contests are worth entering?

Tim: “Memories Die Last” won the Allbooks Reviews Editor’s Choice Award for Fiction in 2004 and was named Best Mystery Novel of 2005 by Blackrefer.com. “Never Trust Your Dreams” was named Blackrefer.com’s Best Mystery of 2006, and “The Vendetta Factor” is currently a finalist in a contest on Authorisland.com. The quotes from the first two books came as a complete surprise, as I didn’t know those sites gave out prizes. You’re right that there are a lot of contests out there, and I would advise writers to research sites or organizations before entering. They should also realize that there is often a cost involved, forbidding many hungry authors. Very often, you have to compare that to the potential exposure you may or may not receive and go from there. If you’re a stranger, I wouldn’t suggest sending your book to the people at Pulitzer unless your horoscope was really good that day.

Tyler: Thanks for the info, Tim. What would you say were your main influences, literary or otherwise, that have inspired your writing?

Tim: From a literary standpoint, I’ve always been a fan of Raymond Chandler, Mickey Spillane, Robert B. Parker, and James W. Hall. I guess his style influenced my way of writing. My biggest inspiration, the one that keeps me writing, is the feedback I get from people who have read my books. The best compliment I can get is when they say “I can’t wait to read the next one.” There is nothing better than that.

Tyler: I agree with you on that, Tim. The appreciation of others for your work outweighs any other benefit. Do you consider yourself only a crime novel writer or do you see yourself dabbling in other genres?

Tim: I’m comfortable writing in this genre, but I recently tried a romantic comedy told from the male’s perspective. Surprisingly, I found that it wasn’t that hard to switch gears, especially since I was able to tap into my own experiences in relationship wars.

Tyler: What are you writing now? Will we see that rom-com in print soon, or is there another chapter to be written on Nick Seven?

Tim: The romantic comedy is currently in the rewrite and polish phase before I review and edit it. I’m also working on another Nick Seven adventure, tentatively titled “Jinx Money.” More Nick stories are to come, as a character with as many layers as he is will always find some kind of trouble to get into. All I need to do is look at today’s headlines and imagine what he would do in the situation.

Tyler: Thanks so much for joining me today, Tim. Before we go, will you tell our readers the address of your website so they can find more information about “The Vendetta Factor” and your other award-winning novels?

Tim: You can visit http://www.timsmithauthor.com to read all about my books and see some photos of the places where the stories take place.

Tyler: Thank you, Tim, for being here today. I hope we can look forward to many more Nick Seven stories.

Running a criminal background check is a great way to find out details about anyone you need more details about. These searches are used not only by detectives, but also by normal people who are curious about someone’s past. In this article we want to show you how you can do it.

People will search someone’s past and personal record for various reasons. Maybe they’re hiring someone, looking for a babysitter, or maybe they’re wondering about someone they just started seeing. There are so many instances where you can dig into someone’s past, and nowadays it’s easy to do.

While it wasn’t easy to get this information before, the Internet makes it incredibly easy to get background information on someone. There’s no need to pay a researcher, because now you can find the information you need right on your PC.

There are now professional background check websites that allow you to run a search through their database. The database contains tons of information about people. You can check anyone’s criminal history, wedding history, employment details, and much more. The amount of detail you can learn is impressive.

There is a small fee to conduct a background search, but it is not much. When I think about how much work it takes to keep the websites and databases up to date, the fees are very reasonable. Your recommended option is to find a company that allows you to perform unlimited record searches for a single flat fee. Paying just once for as many checks as you need is a much better option in the long run.

Here is a quick way you can use to try and find information about a person using a search engine. Enclose the name in quotation marks, followed by the city they reside in if you know it (for example, “John Freeman” Florida). Do the search and then pay attention to the results that appear and if something is worthwhile. If there is information about the person posted on the web, then you can get some information about the person.

Try the trick above and then use a paid search if you don’t get what you want. In this way, you will be sure to know all the details and you will get the details right away on your computer. A criminal record search is a great way to learn the history of anyone you need.

At some point in the life of your pipes and fixtures, you will have to deal with a sink that drains slower than normal, sometimes not at all. If this problem only occurs with a certain sink, then you have a clogged sink. Compared to a clogged sewer, it is easier to clean the sink drain. Here’s how to do it yourself.

Let’s start with the easiest way to unclog your sink: boiling water. Although this is only effective if you have metal pipes, pouring boiling water directly down the drain can dissolve the clog and clean the drain pipe. Boil about a gallon of hot water in a large kettle or use a kettle. For the water directly on the drain and not on the porcelain. Never use hot water to unclog a sink with PVC pipes because hot water can soften these pipes and cause joints to loosen.

When boiling water couldn’t help or you have PVC drain pipes, you should use a plunger to fix a clogged sink. First, you need to know that there are two types of plungers, then cup plunger and flange plunger. To unclog a sink, you must use a bowl plunger. The flange plunger is for use on toilet bowls because they are specifically designed for it. For hygiene reasons, you don’t want to mix the two. When you have the correct plunger, seal the sink overflow outlet with a piece of duct tape. The sink overflow is located at the top of most sinks. For a kitchen sink, remove the basket strainer if you have one. You should also remove the drain plug on a bathroom sink. After doing this, fill the sink halfway with water. Then try to clear the drain pipe with quick, jerky movements. However, be careful not to break your sink.

If even the plunger fails, it’s time for the auger. To work in a sink, use a sink auger or bowl auger, sometimes also called a drum auger. With the drain plug or basket removed, insert the auger cable into the drain. Continue to extend the cable until you feel it against the obstruction and then extend it an additional twelve inches. Tighten the set screw and turn the auger crank. Use firm but gentle pressure. When you feel the obstruction clear, run more cable until you have removed all of the obstruction. Repeat this several times and rinse with hot water when the water starts to flow down the drain. A plumbing snake can also be used in place of the auger.

The use of the auger generally removes most obstructions. However, a clogged sink can become severely blocked and you may need the help of professional plumbers. When all else fails, it’s time to go to the phone book and look up plumbing companies. Many reputable companies offer plumbing services at very affordable prices. They can also help you with problems other than a clogged sink.

There are several easy and inexpensive ways to customize a standard tech deck fretboard.

1.Paint the deck: One of the easiest things to do is get a piece of sandpaper or a nail file and lightly scratch the image on the fretboard deck. Once the deck is smooth and the old graphic is removed, acrylic paint can be applied.

2. Reshape the deck: A standard finger skateboard can be reshaped using a heat source. First remove the grip tape and then slightly heat the platform to soften the plastic. With your fingers, bend and shape the board to create higher kicks and curves.

3. Paint the trucks: Painting the trucks is a great way to personalize a fretboard and make it really stand out. Separate the upper and lower trucks, sand them lightly. Carefully paint all parts of the truck except the threaded part where the wheels attach.

4. Paint Bolts/Screws: Painting micro bolts and small bolts is often overlooked on custom fingerboards. Small parts can be painted by tying them to a thread and dipping them in the desired color of paint.

5. Dye Wheels – The wheels that come with the tech covers can be dyed with regular fabric dyes. Follow the manufacturer’s instructions for using the dye. But leave the wheels longer than suggested to ensure a brighter color.

6. Change the wheels – Anyone serious about customizing their fretboard will eventually look to get new wheels. Completely custom wheels can be purchased that feature high-tech micro ball bearings that increase speed.

7. Add Risers – Risers are the little plastic pieces that go under the bottom of the truck. Adding risers can increase the pop of the board and make tricks easier.

8. Change bushings: Tech decks come with hard plastic bushings that don’t allow much give. Soft PVC bushings can be found in a variety of colors and add a great custom look.

9. Add Pivot Cups – Pivot cups are used when the contact between the king pin on the upper shaft and the king hole on the lower shaft do not connect. The pivot cup covers the gap between the two and holds the truck firmly together. They come in a variety of colors.

10. Custom Grip Tape – Customizing the grip tape on a fretboard is easy. Using a pencil, draw a design on the paper side of the tape. Cutting of the design arranging different colors to form different patterns.